Description
How to use it — 4 simple steps
The whole process takes about 2 minutes. If the first print isn’t perfect, just use a second card and try again.
-
1
Place the card on a flat surface
Put one of the included white cards flat on a table or the floor. This is where the print will appear.
Tip: A treat or lick mat nearby will keep your pet calm and still.
-
2
Place the ink pad on top of the card — ink side down
Set the ink pad on top of the card with the ink side facing down, touching the card. The pad is now sitting on the card like a sandwich, ready to print.
Tip: Make sure the ink side is facing down — the darker side goes toward the card.
-
3
Press your pet’s paw gently down onto the pad
Lift your pet’s paw and press it down onto the top of the ink pad. Hold it still for 2–3 seconds with light, even pressure. At that moment, the paw stamps the card underneath. Lift the paw away cleanly.
Tip: Gentle pressure is enough — do not push hard. Their paw stays completely clean.
-
4
Remove the ink pad — your print is ready
Lift the ink pad off the card. Your pet’s paw print is right there on the card. Slide it into the included frame and you are done. Not happy with it? Use a second card and try again — you have plenty.
Reviews (39)